ASRock 4CoreDual-SATA2 VIA Hyperion Pro Chipset Driver

The ASRock 4CoreDual-SATA2 combines the VIA PT880 Pro or PT880 Ultra northbridge with the VT8237S southbridge. VIA Hyperion Pro 5.24A is the legacy chipset package used to supply platform, AGP, storage and related support on the Windows versions this board was designed for.

ASRock 4CoreDual-SATA2 driver overview

This page is intended for an older working system or restoration build, not a modern Windows 11 PC. The archive is stored locally as a ZIP because the original package contains several components and setup files. Extract it first, then choose only the VIA components that match the installed board and controller mode.

When this chipset package helps

• Windows XP or Vista was reinstalled on the 4CoreDual-SATA2.
• The VIA PT880 or VT8237S platform devices are missing or generic.
• The original motherboard support CD is no longer available.

Supported Windows versions

Windows XP / Vista / 2000 (32-bit / 64-bit).

Before installing

• Extract the ZIP completely before launching setup.exe.
• Check whether the SATA controller is configured for IDE or RAID mode.
• Back up important data before changing a legacy storage driver.

Compatibility notes

VIA Hyperion Pro 5.24A is a legacy package for Windows XP, Vista and Windows 2000 era systems. The ASRock 4CoreDual-SATA2 uses VIA PT880 Pro or PT880 Ultra and VT8237S components, but the exact drivers selected during setup depend on the operating system and whether the SATA controller is operating in IDE or RAID mode. This package is not advertised for Windows 10 or Windows 11, and it does not replace the board's Realtek audio or separate graphics driver.

Common installation checks

• If setup cannot find the board, confirm the exact 4CoreDual-SATA2 model and chipset in the manual.
• If Windows stops booting after a storage change, restore the previous controller mode and driver.
• If only audio or Ethernet is missing, install the dedicated device package instead of repeating Hyperion setup.

Questions about this driver

Should every Hyperion component be installed?

No. Use the components that apply to the operating system and the board's current controller configuration.

Can this package make the board work on Windows 11?

It is a legacy package and is not presented as Windows 11 support. Use an operating system appropriate for the hardware.

The file is stored in the drivers-search.com library. Before installing, compare the model, Windows version, file size and checksum shown on this page.